Skip to main content

Careers

CAREERS AT ABTS

Engineering built on 30 years of getting it right.

Join the engineers and technologists who keep power flowing, trains running, and industrial systems talking to each other — across India, Japan and Bangladesh.

CAREERS AT ABTS

Engineering excellence, built over 30 years.

Be part of a team of engineers and technologists shaping the systems that keep power flowing, railways moving, and industries connected. Join us in driving innovation and reliability across India, Japan, and Bangladesh.

0 +

Years of Techinal Excellence

0 +

Countries - Services Offered

0 +

Projects Executed

0 +

Customers

Open Positions

Find your discipline

Roles are organized by division, the same way our services are. Filter by area or browse everything open right now.

Transportation Engineering

Sr.Engineer - TCW

Educational Qualification : Graduate Engineer (Electrical)  

Experience in MELCO supplied Propulsion System, Auxiliary System and TIMS/TCMS Systems  

Skills (Mandatory): MELCO supplied Propulsion System, Auxiliary System and TIMS/TCMS  Systems 

Skills (Desirable): Troubleshooting, TIMS database modification  

Brief Job Description 

  • During Revenue service if any Component / Equipment fails, Nominate engineers  to attend and support for rectification of that failure within the first available shift  or on emergency basis. 
  • Corrective Maintenance of EPE supplied by MELCO broadly: C/I, APS, TM, MTr,  TIMS, MASCON, ACCB and PWG, equipment and sub-assembly level. Including  technical support for all hardware and software. 
  • Support Keolis Hyderabad for Corrective / Breakdown Maintenance Activity as  Major Services effecting Component/Equipment level failures and its counter  measure to minimize and avoid repetition of failures with similar cause in other  Trains including but not limited to  
  • Troubleshooting & Testing of equipment on test bench.  
  • Fault/Trace data downloading and data analysis using Maintenance Terminal
  • Software uploading as per scope including any modification approved by OEM
  • During Revenue service if any Component / Equipment fails, nominate engineer to attend and support for rectification of that failure within the first available shift  and should submit Site level Failure Investigation report for all failures attended.
  • Submit Failure Investigation report at System, Sub-system or component level  within 03 days for any given fault and within one (1) day for any fault impacting  revenue services. 
  • Work Completion note shall be obtained/provided for all Corrective Maintenance  Jobs assigned. 
  • Monthly activity report along with detail case to case fault and rectification data.
  • Attending all types of complaint within this scope of work. 
  • Technical coordination with MEI (Mitsubishi Electric India) for all technical issues  and clarifications. 
  • Interaction and discussion with the end customer LTMRHL, Keolis.
  • Lead the team in investigation of failures and rectification work.
  • Knowledge of troubleshooting Propulsion, Auxiliary power supply and Train  Control Management Systems (TCMS). 
  • Support for Training & extended field services 
  • Daily, Weekly & Monthly meetings with customer on project progress and  Reliability issues. 
  • Send Periodic reports to reporting manager and HO. 
  • Keep track of technical outstanding issues and Coordinate for timely closure of  outstanding issues. 
  • Review the nature of task and assign to the concerned engineers and optimize the  resources. 
  • Improving quality of the output from engineers. 
  • Providing on-job training to juniors and trainee engineers. Self-learning from  experience and seniors.
  • Commitment towards project completion and organization growth.
  • Within reach to the team, customer and Management at any point of time
  • Complete the works within the customer schedule. 
  • Flexibility and adaptability towards work and providing best output to organization.

    Rolling Stock Maintenance Engineer

      Signaling & Telecom Technician
      PM Maintainer

      Qualification :

      • Diploma (Electrical/ Mechanical) / ITI (1+ yrs of exp in Rail/Automobile Industry)

      Roles & Responsibilities :

      • Carryout preventive maintenance of rolling stock and depot equipment as per laid down guidelines and schedules of Maintenance.
      • Follow the team lead instructions while carrying out the preventive maintenance of Rolling stock and Depot Machinery & Plant (M&P).
      • Available to work in 3 shifts on rotational basis (Morning, Evening and Night).
      • Follow depot safety procedures during the maintenance work.
      • Shall be punctual and strictly adhere to the shift start timings.
      • Shall work in coordination with all the team members and be a good team player.
      • Comply to the maintenance instructions defined in the maintenance procedures and check sheets.
      • Strictly follow the maintenance standards.
      • Shall undergo training as and when necessary to perform the additional maintenance activities.
      • Put best efforts to complete the maintenance services within the maximum allowable completion time
      • If any issue is found during the service check, notify immediately to the team lead.
      • Wear the proper ID badge, uniform, helmet, safety shoes, other appropriate PPE, and do not indulge in practices in violation of the safety procedures laid out by the client.
      • Ensure the quality of workmanship so as to prevent any depot or depot/main line detention or late start or loss of punctuality of trains whatsoever do not arise out of poor workmanship.
      • Ensure that stipulated procedures and safety procedures are followed during the course of maintenance.
      • Ensure the materials, tools etc., including those required for the work being executed in the train-set are being kept in an orderly manner and shall ensure removal of any debris and other materials before the work completion
      • Operate the wheel turning machine, Auto wash plant, Pit jacks, Cranes, Fork lift etc.
      • Shall be able to operate the heavy vehicle inside the depot.
      • Operate the vehicles such as RRM (Rail Road Machine) etc.
      • Involve in Re railing activities.
      • Shall follow the safety procedures while operating depot machinery & plant inside the depot.

        Rolling Stock Maintenance Engineer

          Signaling & Telecom Technician

          ES & EC

          Protection & Control Engineer

          Required & Mandatory Skills: 

          • Hands-on experience with NG works in the UK. 
          • In-depth knowledge of NG standards. 
          • Expertise in the preparation of Construction Documents (CD), General Arrangement (GA), and  Wiring Diagrams (WD) for NG works. 
          • Strong proficiency in E-3 Zuken Software and AutoCAD is mandatory. 
          • Skilled in the preparation and review of electrical schematics and cable schedules,  ensuring accuracy and alignment with overall system design. 
          • Proficient in developing Single Line Diagrams (SLDs) and substation layout  drawings, supporting efficient project execution and coordination across disciplines. 

          Tools: 

          • Perform and analysis using software tools (e.g., Zuken E3, E-TAP, AutoCAD)

          Qualifications: 

          • Bachelor’s degree in Electrical Engineering or related field (Master’s preferred).
          • 3-4 years of experience in electrical engineering (specific experience based on company needs).
          • Strong analytical and problem-solving skills. 
          • Excellent communication and teamwork abilities. 
          • Knowledge of industry standards and regulations (e.g., IEC, IEEE & NG).

            Substation Project Engineer

            Client : USA, To handle USA projects 

            Description 

            The Senior Substation Project Engineer is responsible for supporting the engineering, procurement, construction, testing,  commissioning, and closeout of Substation electrical projects, with a primary focus on substations, transmission-related  scopes, and interconnection facilities for utility-scale solar and battery energy storage projects. 

            This role serves as a key technical and project execution interface between engineering, procurement, construction,  subcontractors, consultants, utilities, and internal project stakeholders. The Project Engineer supports safe, cost-effective,  schedule-driven, and technically compliant project delivery in accordance with contract requirements, applicable codes,  utility standards, and PGS quality expectations 

            Essential Duties and Responsibilities: 

            • Support the engineering execution of substations, transmission lines, gen-tie facilities, interconnection facilities,  protection and controls systems, and related infrastructure from proposal state to project award through closeout.
            • Coordinate with internal engineering teams, external engineering consultants, procurement, construction,  commissioning, and project management to ensure alignment on scope, schedule, , quality, and safety requirements.
            • Review engineering design packages, studies, drawings, specifications, calculations, equipment submittals, relay  settings, protection and controls drawings, grounding designs, cable schedules, SCADA/communications drawings, and  construction deliverables for completeness, constructability, and compliance with project requirements.
            • Support the development, review, and maintenance of project technical documentation, including design basis  specifications, single-line diagrams, general arrangements, grounding plans, control schematics, wiring diagrams,  equipment lists, test plans, commissioning documentation, and as-built records. 
            • Assist in managing engineering deliverable schedules, consultant performance, design review cycles, comment  resolution, and technical action items to support project milestones and construction readiness.
            • Track, log, and help resolve technical RFIs, design clarifications, field change requests, non-conformance items, and  engineering support during construction, testing, commissioning, and energization. 
            • Support procurement of long-lead Substation equipment, including transformers, circuit breakers, disconnect switches,  instrument transformers, relays, control buildings, protection panels, station service equipment, battery systems,  fiber/telecom equipment, and other substation materials. 
            • Support in Review vendor drawings, technical submittals, equipment data sheets, bills of material, factory test  procedures, and operation and maintenance manuals for conformance with project specifications and utility  requirements. 
            • Participate in factory acceptance testing, site acceptance testing, equipment inspections, and resolution of technical  issues with vendors, suppliers, and subcontractors. 
            • Support construction teams by reviewing work plans, installation details, test results, turnover documentation, punch  lists, and commissioning packages. 
            • Assist with permitting, project planning, schedule development, progress tracking, and reporting related to engineering  and technical scopes. 
            • Coordinate with utilities, independent engineers, owner’s engineers, AHJs, EPC partners, subcontractors, and  consultants to resolve technical issues and support successful project execution. 
            • Conduct technical evaluations, feasibility reviews, constructability reviews, value engineering assessments, and risk  assessments for proposed Substation project scopes. 
            • Support estimating, proposal development, EPC bid reviews, subcontractor evaluations, project handoff, and lessons  learned activities by providing technical and execution-focused input. 
            • Ensure designs and work activities comply with applicable codes and standards, including IEEE, ANSI, NESC, NEC,  NFPA, OSHA, NEMA, IEC, utility standards, and project-specific requirements.
            • Support testing, commissioning, energization, and turnover activities, including coordination of test plans,  commissioning checklists, relay testing documentation, outage planning, and utility witness requirements.
            • Represent PGS in technical coordination meetings with consultants, engineering partners, and, as needed, clients and  regulatory authorities. 
            • Promote a culture of safety, quality, accountability, continuous improvement, and proactive communication across  engineering and project execution teams. 

            Education and/or Work Experience Requirements: 

            • Bachelors degree in Electrical Engineering from an-accredited university, 
            • Min 5 years of experience in substation and/or transmission line engineering, design, or project engineering roles.
            • Working knowledge of applicable industry standards and codes, including IEEE, ANSI, NESC, NEC, and NEMA.
            • Demonstrated ability to review engineering deliverables produced by external consultants, EPC contractors, or  engineering service providers, and to identify design errors, omissions, or non-conformances. 
            • Represent PGS in technical coordination meetings with consultants, engineering partners, and, as needed, clients and  regulatory authorities. 
            • Strong written and verbal communication skills, with the ability to coordinate across engineering, project management,  procurement, and construction disciplines. 
            • Proficiency with the Microsoft Office suite, including Word, Excel, PowerPoint, and SharePoint.
            • Detail-oriented, self-motivated, and comfortable working in a fast-paced, scaling organization.
            • Ability to travel occasionally, up to 15%, to project sites and factory acceptance test locations. Preferred 
            • Engineer in Training (EIT) certification, with progress toward Professional Engineer (PE) licensure.
            • Familiarity with power system analysis software such as ETAP, PSCAD, or PSS/E. 
            • Experience working with distributed, multi-firm, or offshore engineering teams. 
            • Experience in solar, BESS, or broader renewable energy interconnection projects. 
            • Experience with document control systems, data rooms, submittal management, RFI tracking, punch list tracking, and  project closeout documentation.

              Electrical Testing & Commisionning Engineer

              Experience 

              • 2–3 years of relevant experience in electrical engineering, testing, or commissioning.  

              Job Summary 

              We are seeking an Electrical Testing & Commissioning Engineer with 2–3 years of experience in  power plants or substations. The candidate should have practical experience in power system (P/S)  testing and commissioning activities, a sound understanding of AC power systems, and the ability  to read and interpret electrical schematic drawings and wiring diagrams.  

              Key Responsibilities 

              • Perform testing and commissioning of electrical equipment installed in power plants and  substations.  
              • Read and interpret electrical schematic drawings, wiring diagrams, single-line diagrams, and  control logic diagrams.  
              • Conduct wiring checks, continuity tests, functional tests, and commissioning activities.  
              • Verify control, protection, and interlocking schemes before system energization.  
              • Assist in troubleshooting issues identified during testing and commissioning.  
              • Prepare test reports, commissioning records, and technical documentation.  
              • Coordinate with engineering, project, and commissioning teams to ensure successful project  execution.  
              • Ensure compliance with project specifications, electrical standards, and safety requirements.  

              Qualifications 

              • Bachelor’s Degree in Electrical Engineering.  

              Experience & Technical Requirements 

              • 2–3 years of experience in electrical testing and commissioning.  
              • Experience with power system (P/S) testing in power plants or substations is preferred.  
              • Candidates without power plant experience should possess a good understanding of AC  circuits and substation electrical systems.  
              • Ability to read and understand electrical schematic drawings, wiring diagrams, and single line diagrams.  
              • Hands-on knowledge of testing and commissioning of :
                • Control Panels  
                • Protection Relay Panels  
                • Automatic Voltage Regulator (AVR) Panels  
                • Synchronizing Panels  
                • Annunciation Panels  
                • Metering and Control Panels  
                • Other electrical control and protection panels used in substations and power plants.  
              • Familiarity with electrical test equipment such as insulation resistance testers, secondary  injection test sets, multi-meters, and continuity testers is desirable.  

              Required Skills 

              • Strong analytical and troubleshooting skills during testing and commissioning.  
              • Good understanding of protection and control philosophies.  
              • Ability to interpret technical documents and electrical schematics.  
              • Good communication and teamwork skills.  
              • Willingness to travel to project and commissioning sites as required.  
              • Strong commitment to safety, quality, and engineering excellence.

                Power — Transmission & Distribution

                Substation Engineer — GIS/AIS

                Responsibilities

                • Design, engineer and review HV/EHV substation layouts for GIS and AIS, including single line diagrams, equipment arrangement, and earthing and lightning protection schemes.
                • Prepare and verify technical specifications, GA drawings, BOQs, and protection, control and SCADA schematics as per IEC/IEEE standards and utility requirements.
                • Review vendor drawings, type test reports and test documents, and take part in FAT/SAT.
                • Coordinate with OEMs, civil, electrical and project teams to close design queries and clashes.
                • Support site activities: installation supervision, testing, commissioning and energization, and resolve technical issues on site.
                • Ensure compliance with safety, quality and project timelines, and maintain accurate as-built documentation.

                Requirements

                • B.E./B.Tech in Electrical Engineering.
                • 3-8 years of experience in EHV/HV substation projects (GIS and AIS).
                • Working knowledge of AutoCAD, ETAP or similar design and simulation tools.
                • Good understanding of IEC/IEEE standards, protection and control systems, and SCADA integration.
                • Strong coordination, documentation and communication skills.
                • Willingness to travel to project sites as required.

                Apply Now

                  EPC Site Engineer
                  Sourcing & Procurement Specialist

                  Rail Transportation Engineering

                  Rolling Stock Maintenance Engineer

                    Signaling & Telecom Technician

                    Software & Cloud | AI | IOT | Cybersecurity

                    Embedded Software Engineer — SCADA/HMI

                      Cloud & DevOps Engineer
                      Cybersecurity Analyst

                      Quality Assurance & Testing

                      QA / Test Engineer — Embedded Systems

                        Other Jobs

                        Other Jobs

                          Transportation Engineering

                          Sr.Engineer - TCW

                          Educational Qualification : Graduate Engineer (Electrical)  

                          Experience in MELCO supplied Propulsion System, Auxiliary System and TIMS/TCMS Systems  

                          Skills (Mandatory): MELCO supplied Propulsion System, Auxiliary System and TIMS/TCMS  Systems 

                          Skills (Desirable): Troubleshooting, TIMS database modification  

                          Brief Job Description 

                          • During Revenue service if any Component / Equipment fails, Nominate engineers  to attend and support for rectification of that failure within the first available shift  or on emergency basis. 
                          • Corrective Maintenance of EPE supplied by MELCO broadly: C/I, APS, TM, MTr,  TIMS, MASCON, ACCB and PWG, equipment and sub-assembly level. Including  technical support for all hardware and software. 
                          • Support Keolis Hyderabad for Corrective / Breakdown Maintenance Activity as  Major Services effecting Component/Equipment level failures and its counter  measure to minimize and avoid repetition of failures with similar cause in other  Trains including but not limited to  
                          • Troubleshooting & Testing of equipment on test bench.  
                          • Fault/Trace data downloading and data analysis using Maintenance Terminal
                          • Software uploading as per scope including any modification approved by OEM
                          • During Revenue service if any Component / Equipment fails, nominate engineer to attend and support for rectification of that failure within the first available shift  and should submit Site level Failure Investigation report for all failures attended.
                          • Submit Failure Investigation report at System, Sub-system or component level  within 03 days for any given fault and within one (1) day for any fault impacting  revenue services. 
                          • Work Completion note shall be obtained/provided for all Corrective Maintenance  Jobs assigned. 
                          • Monthly activity report along with detail case to case fault and rectification data.
                          • Attending all types of complaint within this scope of work. 
                          • Technical coordination with MEI (Mitsubishi Electric India) for all technical issues  and clarifications. 
                          • Interaction and discussion with the end customer LTMRHL, Keolis.
                          • Lead the team in investigation of failures and rectification work.
                          • Knowledge of troubleshooting Propulsion, Auxiliary power supply and Train  Control Management Systems (TCMS). 
                          • Support for Training & extended field services 
                          • Daily, Weekly & Monthly meetings with customer on project progress and  Reliability issues. 
                          • Send Periodic reports to reporting manager and HO. 
                          • Keep track of technical outstanding issues and Coordinate for timely closure of  outstanding issues. 
                          • Review the nature of task and assign to the concerned engineers and optimize the  resources. 
                          • Improving quality of the output from engineers. 
                          • Providing on-job training to juniors and trainee engineers. Self-learning from  experience and seniors.
                          • Commitment towards project completion and organization growth.
                          • Within reach to the team, customer and Management at any point of time
                          • Complete the works within the customer schedule. 
                          • Flexibility and adaptability towards work and providing best output to organization.

                            Rolling Stock Maintenance Engineer

                              Signaling & Telecom Technician
                              PM Maintainer

                              Qualification :

                              • Diploma (Electrical/ Mechanical) / ITI (1+ yrs of exp in Rail/Automobile Industry)

                              Roles & Responsibilities :

                              • Carryout preventive maintenance of rolling stock and depot equipment as per laid down guidelines and schedules of Maintenance.
                              • Follow the team lead instructions while carrying out the preventive maintenance of Rolling stock and Depot Machinery & Plant (M&P).
                              • Available to work in 3 shifts on rotational basis (Morning, Evening and Night).
                              • Follow depot safety procedures during the maintenance work.
                              • Shall be punctual and strictly adhere to the shift start timings.
                              • Shall work in coordination with all the team members and be a good team player.
                              • Comply to the maintenance instructions defined in the maintenance procedures and check sheets.
                              • Strictly follow the maintenance standards.
                              • Shall undergo training as and when necessary to perform the additional maintenance activities.
                              • Put best efforts to complete the maintenance services within the maximum allowable completion time
                              • If any issue is found during the service check, notify immediately to the team lead.
                              • Wear the proper ID badge, uniform, helmet, safety shoes, other appropriate PPE, and do not indulge in practices in violation of the safety procedures laid out by the client.
                              • Ensure the quality of workmanship so as to prevent any depot or depot/main line detention or late start or loss of punctuality of trains whatsoever do not arise out of poor workmanship.
                              • Ensure that stipulated procedures and safety procedures are followed during the course of maintenance.
                              • Ensure the materials, tools etc., including those required for the work being executed in the train-set are being kept in an orderly manner and shall ensure removal of any debris and other materials before the work completion
                              • Operate the wheel turning machine, Auto wash plant, Pit jacks, Cranes, Fork lift etc.
                              • Shall be able to operate the heavy vehicle inside the depot.
                              • Operate the vehicles such as RRM (Rail Road Machine) etc.
                              • Involve in Re railing activities.
                              • Shall follow the safety procedures while operating depot machinery & plant inside the depot.

                                Rolling Stock Maintenance Engineer

                                  Signaling & Telecom Technician

                                  ES & EC

                                  Protection & Control Engineer

                                  Required & Mandatory Skills: 

                                  • Hands-on experience with NG works in the UK. 
                                  • In-depth knowledge of NG standards. 
                                  • Expertise in the preparation of Construction Documents (CD), General Arrangement (GA), and  Wiring Diagrams (WD) for NG works. 
                                  • Strong proficiency in E-3 Zuken Software and AutoCAD is mandatory. 
                                  • Skilled in the preparation and review of electrical schematics and cable schedules,  ensuring accuracy and alignment with overall system design. 
                                  • Proficient in developing Single Line Diagrams (SLDs) and substation layout  drawings, supporting efficient project execution and coordination across disciplines. 

                                  Tools: 

                                  • Perform and analysis using software tools (e.g., Zuken E3, E-TAP, AutoCAD)

                                  Qualifications: 

                                  • Bachelor’s degree in Electrical Engineering or related field (Master’s preferred).
                                  • 3-4 years of experience in electrical engineering (specific experience based on company needs).
                                  • Strong analytical and problem-solving skills. 
                                  • Excellent communication and teamwork abilities. 
                                  • Knowledge of industry standards and regulations (e.g., IEC, IEEE & NG).

                                    Substation Project Engineer

                                    Client : USA, To handle USA projects 

                                    Description 

                                    The Senior Substation Project Engineer is responsible for supporting the engineering, procurement, construction, testing,  commissioning, and closeout of Substation electrical projects, with a primary focus on substations, transmission-related  scopes, and interconnection facilities for utility-scale solar and battery energy storage projects. 

                                    This role serves as a key technical and project execution interface between engineering, procurement, construction,  subcontractors, consultants, utilities, and internal project stakeholders. The Project Engineer supports safe, cost-effective,  schedule-driven, and technically compliant project delivery in accordance with contract requirements, applicable codes,  utility standards, and PGS quality expectations 

                                    Essential Duties and Responsibilities: 

                                    • Support the engineering execution of substations, transmission lines, gen-tie facilities, interconnection facilities,  protection and controls systems, and related infrastructure from proposal state to project award through closeout.
                                    • Coordinate with internal engineering teams, external engineering consultants, procurement, construction,  commissioning, and project management to ensure alignment on scope, schedule, , quality, and safety requirements.
                                    • Review engineering design packages, studies, drawings, specifications, calculations, equipment submittals, relay  settings, protection and controls drawings, grounding designs, cable schedules, SCADA/communications drawings, and  construction deliverables for completeness, constructability, and compliance with project requirements.
                                    • Support the development, review, and maintenance of project technical documentation, including design basis  specifications, single-line diagrams, general arrangements, grounding plans, control schematics, wiring diagrams,  equipment lists, test plans, commissioning documentation, and as-built records. 
                                    • Assist in managing engineering deliverable schedules, consultant performance, design review cycles, comment  resolution, and technical action items to support project milestones and construction readiness.
                                    • Track, log, and help resolve technical RFIs, design clarifications, field change requests, non-conformance items, and  engineering support during construction, testing, commissioning, and energization. 
                                    • Support procurement of long-lead Substation equipment, including transformers, circuit breakers, disconnect switches,  instrument transformers, relays, control buildings, protection panels, station service equipment, battery systems,  fiber/telecom equipment, and other substation materials. 
                                    • Support in Review vendor drawings, technical submittals, equipment data sheets, bills of material, factory test  procedures, and operation and maintenance manuals for conformance with project specifications and utility  requirements. 
                                    • Participate in factory acceptance testing, site acceptance testing, equipment inspections, and resolution of technical  issues with vendors, suppliers, and subcontractors. 
                                    • Support construction teams by reviewing work plans, installation details, test results, turnover documentation, punch  lists, and commissioning packages. 
                                    • Assist with permitting, project planning, schedule development, progress tracking, and reporting related to engineering  and technical scopes. 
                                    • Coordinate with utilities, independent engineers, owner’s engineers, AHJs, EPC partners, subcontractors, and  consultants to resolve technical issues and support successful project execution. 
                                    • Conduct technical evaluations, feasibility reviews, constructability reviews, value engineering assessments, and risk  assessments for proposed Substation project scopes. 
                                    • Support estimating, proposal development, EPC bid reviews, subcontractor evaluations, project handoff, and lessons  learned activities by providing technical and execution-focused input. 
                                    • Ensure designs and work activities comply with applicable codes and standards, including IEEE, ANSI, NESC, NEC,  NFPA, OSHA, NEMA, IEC, utility standards, and project-specific requirements.
                                    • Support testing, commissioning, energization, and turnover activities, including coordination of test plans,  commissioning checklists, relay testing documentation, outage planning, and utility witness requirements.
                                    • Represent PGS in technical coordination meetings with consultants, engineering partners, and, as needed, clients and  regulatory authorities. 
                                    • Promote a culture of safety, quality, accountability, continuous improvement, and proactive communication across  engineering and project execution teams. 

                                    Education and/or Work Experience Requirements: 

                                    • Bachelors degree in Electrical Engineering from an-accredited university, 
                                    • Min 5 years of experience in substation and/or transmission line engineering, design, or project engineering roles.
                                    • Working knowledge of applicable industry standards and codes, including IEEE, ANSI, NESC, NEC, and NEMA.
                                    • Demonstrated ability to review engineering deliverables produced by external consultants, EPC contractors, or  engineering service providers, and to identify design errors, omissions, or non-conformances. 
                                    • Represent PGS in technical coordination meetings with consultants, engineering partners, and, as needed, clients and  regulatory authorities. 
                                    • Strong written and verbal communication skills, with the ability to coordinate across engineering, project management,  procurement, and construction disciplines. 
                                    • Proficiency with the Microsoft Office suite, including Word, Excel, PowerPoint, and SharePoint.
                                    • Detail-oriented, self-motivated, and comfortable working in a fast-paced, scaling organization.
                                    • Ability to travel occasionally, up to 15%, to project sites and factory acceptance test locations. Preferred 
                                    • Engineer in Training (EIT) certification, with progress toward Professional Engineer (PE) licensure.
                                    • Familiarity with power system analysis software such as ETAP, PSCAD, or PSS/E. 
                                    • Experience working with distributed, multi-firm, or offshore engineering teams. 
                                    • Experience in solar, BESS, or broader renewable energy interconnection projects. 
                                    • Experience with document control systems, data rooms, submittal management, RFI tracking, punch list tracking, and  project closeout documentation.

                                      Electrical Testing & Commisionning Engineer

                                      Experience 

                                      • 2–3 years of relevant experience in electrical engineering, testing, or commissioning.  

                                      Job Summary 

                                      We are seeking an Electrical Testing & Commissioning Engineer with 2–3 years of experience in  power plants or substations. The candidate should have practical experience in power system (P/S)  testing and commissioning activities, a sound understanding of AC power systems, and the ability  to read and interpret electrical schematic drawings and wiring diagrams.  

                                      Key Responsibilities 

                                      • Perform testing and commissioning of electrical equipment installed in power plants and  substations.  
                                      • Read and interpret electrical schematic drawings, wiring diagrams, single-line diagrams, and  control logic diagrams.  
                                      • Conduct wiring checks, continuity tests, functional tests, and commissioning activities.  
                                      • Verify control, protection, and interlocking schemes before system energization.  
                                      • Assist in troubleshooting issues identified during testing and commissioning.  
                                      • Prepare test reports, commissioning records, and technical documentation.  
                                      • Coordinate with engineering, project, and commissioning teams to ensure successful project  execution.  
                                      • Ensure compliance with project specifications, electrical standards, and safety requirements.  

                                      Qualifications 

                                      • Bachelor’s Degree in Electrical Engineering.  

                                      Experience & Technical Requirements 

                                      • 2–3 years of experience in electrical testing and commissioning.  
                                      • Experience with power system (P/S) testing in power plants or substations is preferred.  
                                      • Candidates without power plant experience should possess a good understanding of AC  circuits and substation electrical systems.  
                                      • Ability to read and understand electrical schematic drawings, wiring diagrams, and single line diagrams.  
                                      • Hands-on knowledge of testing and commissioning of :
                                        • Control Panels  
                                        • Protection Relay Panels  
                                        • Automatic Voltage Regulator (AVR) Panels  
                                        • Synchronizing Panels  
                                        • Annunciation Panels  
                                        • Metering and Control Panels  
                                        • Other electrical control and protection panels used in substations and power plants.  
                                      • Familiarity with electrical test equipment such as insulation resistance testers, secondary  injection test sets, multi-meters, and continuity testers is desirable.  

                                      Required Skills 

                                      • Strong analytical and troubleshooting skills during testing and commissioning.  
                                      • Good understanding of protection and control philosophies.  
                                      • Ability to interpret technical documents and electrical schematics.  
                                      • Good communication and teamwork skills.  
                                      • Willingness to travel to project and commissioning sites as required.  
                                      • Strong commitment to safety, quality, and engineering excellence.

                                        Power — Transmission & Distribution

                                        Substation Engineer — GIS/AIS

                                        Responsibilities

                                        • Design, engineer and review HV/EHV substation layouts for GIS and AIS, including single line diagrams, equipment arrangement, and earthing and lightning protection schemes.
                                        • Prepare and verify technical specifications, GA drawings, BOQs, and protection, control and SCADA schematics as per IEC/IEEE standards and utility requirements.
                                        • Review vendor drawings, type test reports and test documents, and take part in FAT/SAT.
                                        • Coordinate with OEMs, civil, electrical and project teams to close design queries and clashes.
                                        • Support site activities: installation supervision, testing, commissioning and energization, and resolve technical issues on site.
                                        • Ensure compliance with safety, quality and project timelines, and maintain accurate as-built documentation.

                                        Requirements

                                        • B.E./B.Tech in Electrical Engineering.
                                        • 3-8 years of experience in EHV/HV substation projects (GIS and AIS).
                                        • Working knowledge of AutoCAD, ETAP or similar design and simulation tools.
                                        • Good understanding of IEC/IEEE standards, protection and control systems, and SCADA integration.
                                        • Strong coordination, documentation and communication skills.
                                        • Willingness to travel to project sites as required.

                                        Apply Now

                                          EPC Site Engineer
                                          Sourcing & Procurement Specialist

                                          Software & Cloud | AI | IOT | Cybersecurity

                                          Embedded Software Engineer — SCADA/HMI

                                            Cloud & DevOps Engineer
                                            Cybersecurity Analyst

                                            Quality Assurance & Testing

                                            QA / Test Engineer — Embedded Systems

                                              Other Jobs

                                              Other Jobs